Compatible with BMW ICOM NEXT, ICOM A2, ICOM A3.ICOM PRO+A3

Software Version : V2023.06
ISTA – D: 4.41.30 with SDP Programming Database 4.41.30
ISTA – P: 3.71.0.200 with Engineer Programming，supports the programming of BMW motorcycles and electric vehicles can program F/G/I/K chassis for car (through the ICOM, not other cable )
Vin: V2023.03.24
BMW ETK: 2020.01
BMW KSD: 2019.12  Multilanguage
BMW FSC Navigation Code Generator
BMWAiCoder for BMW Coding
Win10 64 bit operating system

BMW ICOM V2023.06, With free Software:
1. Get engineer version, INPA 5.06, winkfp 5.3.1, NCS 3.5.1, e-sys 3.35.3, E-sys PLUS 3.81, data V71.0
2. get Chinese software DR.GINI B022
3. get count code navigation tool software FSC operator code
4. get one-clik hidden brush tool BMWAi V4.6
5. Add DIS Software for Old cars, DISV57 and DISV44,diagnosis and programming for BMW virtual machines
6. Support Vehicles: For BMW Cars,For BMW Motorcycle,For Rolls-Royce, For Mini Cooper

1.Language:
ISTA-D Support Multi-language: English German Spanish French Italian Polish Portuguese Turkish Czech Swedish Dutch Greek Russian Japaness Korean Thai
ISTA-P Support Multi-language: English, German, Spanish, French, Italian, Polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian,Greek, Russian,Chinese, Japanese, Korean and Thai.
2.Support almost 95% laptop on the world with Intel chip( I3/I5/I7 series) and have 4GB memory
3. Software contain TIS and WDS software( for repair instruction and circuit).
4.Provide bonus engineer software for free, you can use it to do single module programming.
5.Support for Engineers programming. ( Expert Mode)

System Requirements:

Dual-core processor, better above I3; over 4G of memory

Support Model:
It is recommended to use Lenovo ThinkPad: T61, T400, T410, T420, T430, X61, X200, X201, X220 X230 and other laptop with Intel chipset, such as I3 I5 / I7 series.

BMW ICOM Software including:

Package Including:

1pc x BMW ICOM HDD or SSD

Notice:

1. PTT2.8.150 Volvo 88890018 Vocom Software Preinstalled in 500GB Sata HDD.

After receiving the hard drive, please put the hard drive into your laptop and contact us to activate the software for you remotely.

2. If you don’t want to use our hard disk, we can also provide remote installation and activation (Only for ONE PC installation, via teamviewer), and the remote installation will be charged a fee of $50.

DO NOT use ASUS computer, many ASUS models can’t active, if you use ASUS computer, i don’t promise you can active PTT, it is not the software problem, it is your computer’s problem.We will not accept any refund.

language: English, German, Spanish, French, Italian, Dutch, Polish, Portuguese, Russian, Turkish, Greek, Czech, Danish, Latvian, Lithuanian,  Romanian,  Finnish, Swedish, Korean, Japanese, Thai, Serbian, Montenegrin, magyar, Chinese Traditional, Chinese Simplified.

PTT2.8.0 Software Recommanded Hardware Requirements:

1.Dual-core processor, better above I3; over 4G of memory

2.It is recommended to use Dell E6420,Dell 630，Lenovo ThinkPad: T61, T400, T410, T420, T430, X61, X200, X201, X220 X230and other laptop with Intel chipset, such as I3 I5 / I7 series.

Top 5 Reasons to Get PTT2.8.0 Software:

1. Work with nexiq, xtruck, DPA4+, DPA5,Vocom, 88890020, Noregon

2. It can work on 2021 trucks,

3. Support version 3 and 4

4. Support Muti-language

5. Software includes dev2tool with standard database, visfeed and ptt.

Volvo PTT2.8.0 Software development+devtool+devtool plus+acpi plus 2021 included:

1. Last official version Volvo Tech Tool 2.7.116 Development maximal authorized

* Full Techtool Activating (For all volvo brands !!!)

* Last ACPI+ update for standard and for development AND special DESIGNER user !!!

* You can Choose User ID like: A123456 or M555555 OR TECHTOL OR ANY OTHER..

*You can choose your logo or name to stay in techtool

*NOT DLL PATCHED registration. Real registration for Techtool

2. Dev2tool (for programming parameters on older trucks)

3. Developer tool Acpi+ Ultimate pro v3 (for programming parameters on newer trucks)

– Connection on real vehicle – NEW Verion

4. IS editor Encriptor/ Decriptor

5. Visfeed + Volvo xml editor + instriuction

6.Volvo/ IS File Encryptor/Decryptor

DESCRIPTION：

Tech Tool (TT) is a tool that supports the repair and diagnostic process. It was developed to make repair shop tasks easier and more efficient. TT can be used in the repair shop, out in the field, at the roadside, or during test drives. TT is a diagnostics application that covers the whole repair process through the use of plug-ins. With TT you can diagnose, test, calibrate, and program a product. A product could be a vehicle, engine, or a machine. TT also provide functions for updating the tool, communication with the product, and other external applications. The set of plug-ins, user authorizations, and available languages is adjustable to provide every user with what they need.

The Basic Workflow in Tech Tool is the Same for All Products:

• Identify a product.

• View information history.

• Diagnose a selected product.

• Test a selected product.

• Program a selected product.

• Calibrate a selected product.

Supported Companies and Electrical Systems:

Lasted Apci+ Update

Volvo Trucks (Older electrical system, Vehicle electrical system \’98);

Volvo Trucks (VERSION2, VERSION3 – PARAMETER PROGRAMMING);

Volvo Trucks (VERSION4 – FH4/FM4 – PARAMETER PROGRAMMING);

Volvo Buses (Conventional, Multiplexed, Multiplexed v2, Multiplexed v3 [/b]);

Volvo Construction Equipment PARAMETER PROGRAMMING;

Volvo Penta (VERSION2, VERSION3);

Volvo OEM Component Customer (VERSION2, VERSION3);

Mack Trucks (V-MAC I/II/III, ITC, IV, IV+ – PARAMETER PROGRAMMING);

Renault Trucks (VERSION2, VERSION3, VERSION4 – PARAMETER PROGRAMMING);

UD Trucks (VERSION2, VERSION3,VERSION4)).PARAMETER PROGRAMMING).

Dev2tool Full Level : 

• Special tool to access and program parameters of ANY Level without any restrictions;

• Change minimum/maximum values of parameters, for example: increase speed limit;

• Works with Tech Tool in Normal or Development mode;

• Support 28 languages;

• Support all brands and models supported by Tech Tool;

• Included Mack Developer Tool for editing V-MAC I/II/III/ITC parameters.

Some Interesting Options:

• Chassis ID Change.

• Immobilizer ON/OFF.

• Injector programming.

• Speed Limit programming.

With This Tool You Have This Interesting Options:

• AdBlue OFF.

• Convert EUR3 to EUR5.

• EGR OFF.

• NOx Torque Reduction OFF.

Package Including:

1pc x PTT2.8.150 Volvo 88890018 Vocom Software Preinstalled in 500GB Sata HD

Bendix ACom PRO Diagnostics

Diagnostics at your fingertips to quickly troubleshoot, repair, and recalibrate Bendix systems & components.

 Antilock Braking (ABS) / Automatic Traction Control (ATC) / Stability Control[/b]

• Electronic Controllers, including the Bendix EC-60, and EC-80 units

Collision Mitigation (FLC-20, FLR-20, FLR-21, and more)

• The family of Bendix Wingman driver assistance systems, including Bendix Wingman ACB, Wingman Advanced, and Wingman Fusion

Alert & Data Systems

• VORAD-VS400 and VORAD-VS500 radar systems
• Bendix DIU (driver interface unit)
• SafetyDirect processor (SDP)
• AutoVue Lane Departure Warning Systems (3G and 4G)
• BlindSpotter side object detection
• SmarTire Tire Pressure Monitoring System (TPMS)
• ADB2ZX Air Disc Brake (ADB) pad wear sensing

Trailer Systems

• SmarTire TrailerLink Tire Pressure Monitoring System (TPMS)
• Trailer ABS & Roll Stability, including:
  • Bendix TABS6-Standard
  • Bendix TABS6-Premium
  • Bendix TABS6-Advanced
• Legacy Trailer ABS systems, including
  • EC-17 electronic controller
  • EC-30 and EC-30T electronic controllers
  • MC-30 ABS module
  • A18 trailer ABS system
  • ABS U1x (Gen 4), ABS2x (Gen 5)

Hardware Interface Required

• RP-1210C-Compliant Communications Adapter
  • Noregon DLA+ 2.0 Adapter Kit
  • Other Compliant Adapters

Universal diagnostic service analyst runs on a PC and is similar to cat ET or Cummins INSITE.

A diagnostic software is used for diagnostics of engines Kenworth, Peterbilt Trucks as service stations and at home using a personal computer running Windows ( version 2000 and higher).

Diagnostic software is used for support for the following vehicle Software:

– Paccar esa with internal, external and flash station tab enabled

– Abillity to block codes change thresholds
– Change vin number without chassis file

– Bench connection to all module without cecu connected

– BYPASS NEED to reflash to connect to plc’s

– Instrument Cluster Software,

– Chassis Node Software,

– Cab Electronic Control Unit Software,

– HVAC Software,

– PACCAR Display Software.

This program provides a link to a diagnostic interface for NEXIQ Kenworth and Peterbilt.

This program provides a link to a diagnostic interface for NEXIQ Kenworth and Peterbilt.

NOTE: Paccar Electronic Service Analyst 5.5.0 is provided without access to Paccar ePortal. Instead of it, we will add SW (flash files) to be able to connect to the vehicle without ePortal access.

Diagnostic Software Caterpillar ET 2022A (replaces CAT ET 2021B, 2020C, 2019C):

PC, Communication Hardware, and Cable Requirements
To run the service tool, the next PC, communication hardware, and cable requirements must be met.
NOTE: The minimum PC Configurations should not be used as a standard when buying new personal computers for service tool purposes. If the existing equipment meets these minimum requirements, it will run the service tool.

PC Requirements
Recommended Configurations
PC containing a 2.0 GHz dual-core processor
3GB RAM
3GB of the available hard disk drive
DVD-ROM drive (optionally)
15.4-inch XGA Screen (1280×1024 compatible)
Microsoft Windows™ 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built-in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 11 or newer or Microsoft Edge is recommended.
Note: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.

Caterpillar electronic technician 2021B with WinFlash future is an updated version of the caterpillar dealer diagnostic software that can help technicians to diagnose existing and potential problems with their electronically controlled Caterpillar Engines and Machines.

To get the vehicle information the Cat ET software must be connected to the Electronic Control Module (ECM). For this purpose, you need a suitable diagnostic link adapter (DLA), for instance, Genuine CAT Comm Adapter III.

The laptops with ARM CPUs (Snapdragon 8cx, Microsft SQ1, etc) type are not supported!

The list of supported CAT machines and engines can be found below:
Engines:
Electric Power
Electric Power Generation
Industrial
Marine Power Systems
Oil and Gas

Machines:
Articulated Trucks
Asphalt Pavers
Backhoe Loaders
Cold Planers
Compactors
Dozers
Drills
Excavators
Feller Bunchers
Forest Machines
Forwarders
Harvesters
Hydraulic Mining Shovels
Knuckleboom Loaders
Material Handlers
Motor Graders
Off-Highway Trucks
Pipelayers
Road Reclaimers
Site Prep Tractors
Skid Steer and Compact Track Loaders
Skidders
Telehandlers
Track Loaders
Underground – Hard Rock
Underground – Longwall
Underground – Room and Pillar
Utility Vehicles
Wheel Dozers
Wheel Excavators
Wheel Loaders
Wheel Tractor-Scrapers

What’s New – 2022A
Microsoft® Windows™ 11 Compatibility

Service tool testing has been performed and the service tool is compatible with Windows 11.

ECM File Replacement Compare Feature

The service tool now has an ECM Replacement File Compare feature for troubleshooting purposes. This feature allows the user to compare one ECM replacement file with another from within the ECM Replacement feature screen. The feature will highlight the differences between the selected files as a whole or the user may select the “only show differences” checkbox.

Configuration Group Headings on ECM Replacement Feature

In order to help the user find ECM replacement configuration items easier, configuration items in the ECM Replacement, Fleet Configuration, and Product ECM features are now grouped under their group sub-headings, as is done in the main configuration feature.

What’s New – 2021C
Feature Protection System Password Copy

The Feature Protection System (FPS) has a new “Easy Copy” link to copy passwords in a single operation. The service tool can automatically obtain the passwords from the clipboard and populate the FPS dialog. The service tool dialog also has a new “Easy Paste” button that allows the user to paste data of the correct format from the clipboard. Passwords can still be pasted using customary copy/paste operations, such as the context menu or the CTRL + V hotkey combination.

Screen Resolution Requirement Update

The minimum requirement for screen resolution has been updated to 1366×768, or at least 1366 pixels horizontally and at least 768 pixels vertically. The recommended screen resolution is at least 1600×1200. The service tool window displays with a minimum size of 1024×680.

What’s New – 2021B
End of Support for Windows 8

Microsoft is ending extended support for Windows 8 as of January 2023. The service tool will be ending support for Windows 8 after the 2021C release.

Calibration Images

Images attached to calibration instructions will no longer need to be opened manually to be viewed by a technician. The service tool will now have split user interface windows for calibrations that display pictures. This will allow the technician to see the images without having to navigate away from the instructions. Images may be opened into individual windows and resized for better clarity. The user interface for calibrations that do not display pictures will remain unchanged.

Default PC Browser

The service tool will no longer automatically launch web pages in Microsoft Internet Explorer. Web pages will now launch in whatever application is configured as the default internet browser. Certain web pages require a specific browser and may launch in a different browser.

What’s New – 2021A
No significant new features or feature enhancements

What’s New – 2020C
No significant new features or feature enhancements

What’s New – 2020B
Trainer Update – 299D3

The 299D3 Skid Steer Loader has been added to the Trainer application.

What’s New – 2020A
Product Status Report Updates

The Product Status Report has been updated to include throttle configuration information.

Built-in Factory Password Generator

The experimental feature allows you to decode (18-Bit passwords not supported) factory passwords

What’s New – 2019C
Indication of Selected Communications Adapter

The service tool now displays the selected communications adapter when the service tool is disconnected. The adapter name is displayed in the status area at the bottom right of the service tool window.

Communication Hardware
Caterpillar Communication Adapter III
Configuring Cat Electronic Technician to use the Communication Adapter 3
For Cat Electronic Technician to work with the Communication Adapter 3, the settings must be changed to select the Communication Adapter 3 as the Communication Interface Device:
Step 1 Start Cat Electronic Technician.
Step 2 Click the Stop Connect button when it appears.
Step 3 Select the Utilities menu.
Step 4 Choose “Preferences > Modify…”.
Step 5 Select the Communications tab.
Step 6 Select Cat Comm Adapter 3 (RP1210) and click OK.
NOTE: Because a growing number of products require multiple data link service, the “Enable Dual Datalink Service” checkbox has been pre-selected.
Servicing ECMs on more than one data link requires this check box to be enabled.
Failure to do this will result in undetected ECMs and reduced functionality.

Package Includes:
1pc x Caterpillar ET 2022A software (Can choose to send online)